• Lisebelisoa
  • Ikopanye
    • enSenyesemane
    Sehlopha

    Kakaretso ea Litsela tsa Rōna tsa Maqephe a Extrusion

     
     
     
     
    LITAI PP PS Sheet Extruder

    E na le boiphihlelo ba lilemo tse fetang 24 Chaena, LITAI e sebetsa ka thata ho etsa-mahala a holimo a sebetsang a lisebelisoa tse fapaneng tsa thermoplastic, ho kenyeletsoa.PP, PS, PET, PLA, le tse ling. Seseteme ea rona ea extrusion e fana ka lisebelisoa tse ngata, taolo e nepahetseng ea botenya, le{1}}botsitso ba nako e telele. E sebelisoa haholo hoho paka le tlhahiso ea likarolo tsa indasteri, lithapo tsa rona tsa extrusion li entsoe ho fihlela litlhoko tse fetohang tsa baetsi ba lefats'e ka katleho e kholo, ho nepahala, le ho ikamahanya le maemo:

    Tlhahiso e Phahameng-:Moralo o ntlafalitsoeng oa sebopeho o thusa tlhahiso e phahameng haholo ntle le ho senya boleng ba sehlahisoa.

    Matla a Matla:Litsamaiso tse tsoetseng pele tsa taolo li fokotsa tšebeliso ea matla le ho fokotsa litšenyehelo tse akaretsang tsa ts'ebetso.

    Polokeho le Tumellano:Mekhoa ea ts'ireletso e kopaneng e netefatsa hore e lumellana ka botlalo le litekanyetso tsa machaba, ho kenyeletsoa CE le litsamaiso tse tiisitsoeng tsa ISO-.

    Ho feto-fetoha ha maemo:Moralo oa modular o lumella tlhophiso e bonolo ho pholletsa le botenya ba maqephe a fapaneng, bophara le mefuta ea thepa.

    Leqephe Extrusion Lines

     
     
     
     

    Re fana ka lithapo tsa extrusion tsa sheet extrusion ka botlalo bakeng sa thermoplastics joalo ka PP, PS, PET, le PLA, kamefuta e le 'ngoe-ea lera le mefuta e 'meli-ea mekhahlelo e 'melie fumanehang ho lumellana le litlhoko tse fapaneng tsa tlhahiso. Ho phaella ho mela e tloaelehileng, re boetse re fana kacustomized lakane extruders kapa lakane extrusion melapoho latela litlhoko tsa hau tse khethehileng tsa tlhahiso.

    Ho Utloisisa Likarolo Tsa Bohlokoa tsa Lakane ea Extrusion ea Sheet

     
     
     
     

    Likarolo tsa bohlokoa tsa lakane la extrusion la lakane li sebetsa 'moho ho fetola lisebelisoa tse tala tsa thermoplastic ho-mashiti a boleng bo holimo. Mona ke kamoo ba kenyang letsoho tlhahisong e sebetsang hantle.

    Sesebelisoa sa ho futhumatsa Leqephe:Poleiti ea ho futhumatsa ea ceramic e laoloang e ikemetseng e fana ka katleho ea 96%, e fokotsa tšebeliso ea matla ka hoo e ka bang 30% ha e bapisoa le mekhoa ea khale ea ho futhumatsa. E entsoe ka-lisebelisoa tse hanyetsanang le mocheso o phahameng joalo ka alumina, e netefatsa polokeho e ntle le ho tšoarella nako e telele. Ka nako ea bophelo ea lihora tse fetang 100,000 'me ho se na likarolo tse tsamaeang, e theola haholo litšenyehelo tsa tlhokomelo.
    Automatic Screen Changer:Sesebelisoa sa ho fetola skrini se laoloa ke hydraulic system, e lumellang{0}}phetoho e sa khaotseng ea sefe le ho netefatsa ts'ebetso e tsoelang pele, e tsitsitseng ea tlhahiso.
    45℃Oblique Extrusion Die Head:Taolo e nepahetseng ya thempereichara le moralo o feto-fetohang wa dipounama tsa molomo o netefatsa hore o sebetsa hantle-lisebediswa tse babang le botenya ba lakane.
    Tse tharo-Khalendara ea Roller:Tobetsa ho qhibiliha ha extruded ho lakane e bataletseng ebe e e pholisa ka nako e le 'ngoe. E na le moralo oa lirolara tse tharo- tsa sebopeho se bonolo, ts'ebetso e bonolo, le tlhokomelo e bonolo.
    Heating Device
    Sesebelisoa sa ho futhumatsa
    Automatic Net Changer
    Automatic Net Changer
    45° Oblique Extrusion Die
    45℃Oblique Extrusion Die
    Three-Roller Calender
    Tse tharo-Khalendara ea Roller
     

    U Batla Moetsi ea Tšepahalang oa China Plastic Sheet Extrusion Line Manufacturer?

     
     
     
     

    LITAI ke molekane oa hao eo u mo tšepang bakeng sa -lisebelisoa tse phahameng tsa PET, PP, le PS tsa ho hlahisa maqephe, tse fanang ka litharollo tse ikhethileng
    le ts'ehetso ea lefats'e ho fihlela litlhoko tsa hau tsa tlhahiso.

    Fumana Theko ea Morekisi  Buisana le Litsebi Tsa Rōna 

    Mokhoa oa Tlhahiso & Taolo ea Boleng

     
     
     
     
    Plastic Sheet Extrusion Line Manufacturing Workshop in China

    Mokhoa oa Tlhahiso o Etsa bonnete ba hore-Ts'ebetso e Phahameng

    Re netefatsa ts'ebetso e phahameng le ts'epahalo ea mohala o mong le o mong oa extrusion oa lakane ka ts'ebetso e felletseng e kenyelletsang moralo oa mohopolo,ho sebetsa ka nepo, kopano e matla, tlhahlobo e phethahetseng, le tlhahlobo ea ho qetela ea boleng. Mohala o mong le o mong o na le likarololitsamaiso tse kopaneng tsa automation, moralo o nepahetseng oa hlobo, le lisebelisoa tse thusang, kaofela li entsoe ho ts'ehetsa lits'ebetso tse fapaneng le ho fihlela litlhoko tse matla tsa tlhahiso ea bareki ba rona.

    Tlhahiso ea Rōna 
    Quality Inspection for Plastic Sheets

    Taolo e Matla ea Boleng e Etsa Hore Sehlahisoa se Tsitsise

    Re latela theISO 9001:2000Sistimi ea taolo ea boleng le litekanyetso tsa setifikeiti sa CE, ho kenya ts'ebetsong atlhahlobo-ea mekhahlelo e meraroho pholletsa le thepa e tala, tlhahiso, le teko ea ho qetela. Litlhahlobo tsohle li etsoa kelitsebi tse netefalitsoengho sebelisa lisebelisoa tse tsoetseng pele joalo ka lisebelisoa tsa optical spectrum analyzers, ho hokahanya metjhini ea ho metha, le li-interferometer tsa laser ho netefatsa hore ho tsamaellana le litekanyetso tsa machabeng mohatong o mong le o mong.

    Taolo ea rona ea Boleng 

    Lipale tsa Katleho ea Bareki

     
     
     
     
    PP/PS Double-Layer Sheet Extruder

    Ho Tloha ho Moputso o Tlase{{0}Ho ea ho 30% ea Moputso: UAE Cup Maker's Two-Katoloso ea Mebala

    Moreki ea tsoang UAE qalong o ne a hlahisa linoelo tse lahliloeng tsa PP tse pepeneneng, empa mofuta ona oa senoelo o ne o e-na le theko e tlase, e bakang phaello e tlase. Ka mor'a ho etsa tlhahlobo ea 'maraka, o ile a fumana hore-likopi tse peli tsa mebala li ne li rekoa haholo 'me li fana ka menyetla e betere ea 'maraka. Eaba o reka mochine oa rona oa TJS-750F, o ileng oa mo thusa ho eketsa phaello ea hae ka 30%.

    Automatic PP/PS Single-Layer Sheet Extrusion Machine Machine

    Tharollo ea Packaging ea Lijo: P & B Food Tray Thermoforming le Sheet Extrusion Production Lines

    Moreki enoa o na le morero o mocha oa tlhahiso ea ho paka lijo. Ba batla{1}mosebelisi oa boleng bo holimo le ea nang le boiphihlelo bo holimo ea ka fanang ka mohala o felletseng oa tlhahiso—ho tloha ka metjhini e ntšang maqephe ho isa ho ea thermoforming—bakeng sa lihlahisoa tsa ho paka lijo. Hajoale, lisebelisoa li se li ntse li hlahisoa 'me li sebelisoa fekthering ea bareki.

    Fully-Automatic PP/PS Sheet Extrusion Machine Machine

    Hullaf Turkey: Terene ea Lijo Thermoforming & PP/PS Litsela tsa Mochini oa Extrusion Sheet

    Ona ke morero o mocha oa tlhahiso ea ho paka lijo bakeng sa moreki enoa. Moreki o etetse barekisi ba bangata naheng ea China, haholo-holo a batla -bafepedi ba metjhini ba maemo a hodimo-ba nang le boiphihlelo, le ba nang le boiphihlelo ba ka fanang ka -lenaneo la koetliso la likhoeli tse peli mabapi le tšebetso ea lisebelisoa bakeng sa lienjiniere tsa bona. Ho tloha qalong ea morero, moreki o ile a etela fektheri ea rona, a etsa lipuisano tse tharo, 'me a tšoara liboka tse' maloa ho phethela moralo oa thepa le ho beha odara. Ts'ebetso eohle e ile ea nka likhoeli tse ka bang 'nè. Hona joale, thepa e se e ntse e etsoa le ho sebetsa fekthering ea bareki.

    PET/PLA Single-Layer Sheet Extrusion Line

    Khampani ea Liphutheloana tsa Litholoana: TTF-820AF & TJP-900E Tharollo

    Moreki o hloka taolo e nepahetseng holim'a botenya ba sehlahisoa. Ho fihlela sena, re thehile tharollo e kenyelletsang mochini oa TTF-820AF le TJP-900E, o nang le mochini o lekanyang botenya ho netefatsa hore maqephe ohle a hlahisoang ke TJP-900E a latela lintlha tsa botenya. Ho ipapisitsoe le tšebeliso ea lakane e baliloeng bakeng sa TTF-820AF, TJP-900E e ka hlahisa 400 kg ea lakane ka hora, e netefatsa hore tlhahiso ea lakane e feta sekhahla sa tšebeliso.

    LBH
    • P: Ke lisebelisoa life tse ka sebetsoang ka mohala oa lakane oa extrusion?

      A: Mela ea rona ea extrusion ea lakane e ka sebetsana le mefuta e mengata ea thermoplastics, ho akarelletsa PP, PS, PET, PLA, le tse ling. Likhetho tse ikhethileng tsa thepa le tsona lia fumaneha ho latela litlhoko tsa hau tse ikhethileng.

    • P: Ke mofuta ofe o tloaelehileng oa botenya ba lakane o ka fihlellehang?

      Botenya ba lakane bo ka fihlellehang bo ipapisitse le mofuta oa thepa:

      • PP/PS Sheet Extrusion Line:0.3–2.0 limilimithara

      • PET/PLA Sheet Extrusion Line:0.2–1.8 limilimithara

    • P: Botenya ba lakane bo laoloa joang nakong ea tlhahiso?

      K: Botenya ba maqephe bo laoloa ka nepo ke litekanyo tsa botenya tse itšebetsang le{0}}seseteme ea maikutlo ea nako, ho netefatsa boleng bo ts'oanang le bo ts'oanang nakong eohle ea tlhahiso.

    • P: Na ts'ebeliso ea matla ea matla e nkuoa meleng ea hau ea extrusion?

      A: Ho joalo. Mechini ea rona e etsang lilakane tsa polasetiki e sebelisa-enjene e sebetsang hantle haholo le taolo ea mocheso oa PID ho fokotsa tšebeliso ea matla. Likarolo tsena- tsa ho baballa matla li thusa ho theola litšenyehelo tsa ts'ebetso le ho ts'ehetsa tlhahiso ea nako e telele.

    • P: Na mohala oa thermoplastic sheet extrusion o ka etsoa ka mokhoa o ikhethileng?

      A: E, re fana ka mela e hlophisitsoeng ea lakane ea extrusion e lumellanang le bokhoni ba hau ba tlhahiso, mofuta oa thepa, bophara ba lakane, botenya le litlhoko tsa boiketsetso.

    • P: O ka fana ka mehlala?

      Ee, re fana ka mehlala ea melaoana ho latela maemo a thekiso:

      • Lithekiso tsa{0}pele:Haeba o kopa disampole pele o etsa odara, litefiso tsa sampole li tlameha ho lefuoa esale pele. Litefiso tsena li tla ntšoa ho odara ea hau e latelang.

      • Nakong ea thekiso:Re fana ka lihlahisoa tsa sampole tsa mahala, empa bareki ba ikarabella bakeng sa litšenyehelo tsa thomello.

      • Kamora{0}lithekiso:Re fana ka mehlala ea mahala mme re koahela litšenyehelo tsa ho romella bakeng sa bareki ba rona ba teng.

    • P: Nako ea hau ea ho tsamaisa ke efe?

      A: Joaloka mohala o etellang pele oa China oa polasetiki, re fana ka lisebelisoa tse tloaelehileng nakong ea matsatsi a 45, 'me mechine e hlophisitsoeng e hloka bonyane matsatsi a 60.

    • P: Litšebeletso tsa hau ka mor'a-ke life?

      LITAI e fana ka litšehetso tsena:

      • Therisano ea tekheniki e fumaneha matsatsi a 7 ka beke, lihora tse 12 ka letsatsi

      • Litlhahlobo tsa remoutu tsa video bakeng sa ho rarolla mathata kapele

      • Latela-li-spare parts tsa morao-rao ka potlako (likarolo tse tloaelehileng li romelloa nakong ea lihora tse 24)

      • Ho-ketelo ea moenjiniere oa sebaka se teng (litšebeletso tse lefelloang)

    Joalo ka e mong oa baetsi le barekisi ba lilaete tse hloahloa ka ho fetesisa naheng ea China, re hlahisoa ka lihlahisoa tsa boleng bo holimo le theko e ntle. Ka kopo, kholiseha hore u tla reka-mohala o holimo oa lishiti tse tsoang femeng ea rona.

    Ntlafatsa Tsebo ea Rōna ea Indasteri ho Matlafatsa Mohala oa Hao oa Tlhahiso
     
     
     
     

    Feme ea mochini e futhumatsang mocheso ea polasetiki ea LITAI e na le litsi tse tsoetseng pele tsa mochini oa CNC le lisebelisoa tsa tlhahlobo, tse sebetsang ka tumellano e tiileng le litsamaiso tsa tlhahiso tsa ISO9001 le CE{1}} tse netefalitsoeng. Mefuta ea rona ea -lisebelisoa tse sebetsang hantle tsa polasetiki tsa thermoforming, ho kenyeletsoa{4}}mechini ea liteishene tse ngata tsa thermoforming, metjhini ea polasetiki e etsang thermoforming cup, le lilaete tsa sheet extrusion li 'nile tsa tšeptjoa ke bareki linaheng le libakeng tse ka bang 100.

    • img1
    • img2
    • img3
    • img4
    • 24+ boiphihlelo ba lilemo
    • 60+ sehlopha sa tlhahiso ea boenjiniere
    • Matsatsi a 45 a ho etella pele bakeng sa lisebelisoa tse tloaelehileng
    • $20millione+ boleng ba tlhahiso ea selemo le selemo

    Fumana Qotsulo

    Ka kopo fana ka litlhoko tsa hau tse qaqileng tsa tlhahiso, joalo ka thepa, boholo ba sehlahisoa, litebello tsa boiketsetso, le sepheo sa tlhahiso, e le hore re ka lekola ho khonahala le ho sisinya mefuta e nepahetseng kapa tharollo e etselitsoeng litlhoko tsa hau.
    Kholiseha, re tla khutlela ho uena nakong ea lihora tse 24.
    sales4@litai.cc