• Lisebelisoa
  • Ikopanye
    • enSenyesemane
    Sehlopha

    Meetso ea rona e 4 ea Mochini oa Thermoforming

     
     
     
     

    Hobaneng re Khetha Mechini ea Rōna e 4 ea Thermoforming Plastiki

     
     
     
     

    Ka litifikeiti tsa ISO9001 le CE, thepa ea rona ea thermoforming e netefatsa boleng bo holimo le ts'epahalo, e etsa hore batho ba tšepeloe.
    ea bareki linaheng tse fetang 100 lik'honthinenteng tse tšeletseng lefatšeng ka bophara.

    • Sistimi e kopantsoeng ea 4-in-1

      Ho futhumatsa, ho etsa, ho itšeha le ho bokellana ho kopantsoe le potoloho e le 'ngoe e ikemetseng. Seteishene se seng le se seng se khannoa ke Servo Motor (Delta, Taiwan) e nang le tšireletso e ngata.

    • Ho Fetola-Lebelo le ho Etsa Hantle

      Mechini ea rona e netefatsa boleng bo tsitsitseng ba sehlahisoa se nang le taolo e phahameng-ea servo ea matla, moralo o nepahetseng oa hlobo, le ho nepahala ha mocheso oa ±1℃PID, e sebetsa ka lebelo le phahameng haholo la makhetlo a 30/ka motsotso.

    • Tšebelisano e fapaneng ea lintho tse bonahalang

      Mechini ea rona e ts'ehetsa lisebelisoa tse kang PP, PS, HIPS, PET, PVC, PLA, le tse ling, ka sistimi ea rona e nang le patente e felletseng ea servo drive e potlakileng ea phetoho ea hlobo (< 20 minutes) for greater efficiency.

    • Customizable Solutions

      Re ka fetola maemo a mantlha a mochini le litlhophiso ho latela litlhoko tsa hau tsa tlhahiso le boemo ba othomathike. Letšoao le ikhethileng le nts'etsopele ea hlobo le tsona lia fumaneha.

    4 Seteishene sa Thermoforming Line Auxiliary Equipment

     
     
     
     
    4 Station Thermoforming Line Auxiliary Equipment

    Selekane le LITAI ho Nka Mela ea Hao ea Tlhahiso ho ea Boemong bo latelang

     
     
     
     

    LITAI, moetsi oa mochini oa thermoforming ea nang le boiphihlelo, o fana ka lithermoform tsa polasetiki tse 4-seteishene se nepahetseng hammoho le tšehetso e inehetseng bakeng sa hau.
    mela ea tlhahiso ea lihlahisoa tsa polasetiki tse lahloang.

    Fumana Mohlala  Ikopanye le Litsebi tsa Rōna 

    Lits'ebetso tse Fapaneng tsa Mechini ea Rōna e 4 e Etsang Leqephe la Plastiki

     
     
     
     

    Mechini ea rona e sebelisoa haholo ho paka lijo, lisebelisoa tsa bongaka, lisebelisoa tsa elektroniki tsa bareki le likarolo tsa temo, haholoholo bakeng sa lijana tsa polasetiki tse nang le masoba. Ho nepahala ha tsona le lebelo la tsona li li etsa hore li tšoanelehe bakeng sa{1}}ho etsa molumo o phahameng oa likarolo tsa polasetiki tse rarahaneng.

    • Sephutheloana sa Lijo
    • Bongaka & Bongaka
    • Tsa elektroniki
    • Temothuo
    • Fruit Box

      Lebokose la Litholoana

    • Cup Lid

      Sekoahelo sa Mohope

    • Egg Tray

      Terei ea mahe

    • Injection Tray

      Terei ea ente

    • Cup Lid

      Terene ea syringe

    • Electronic Packaging

      Packaging ea Elektronike

    • Electronic Components Packaging

      Packaging ea likarolo tsa elektroniki

    • Electronic Box

      Lebokose la Elektronike

    • Mobile Phone Packaging Box

      Lebokose la Phahamiso ea Mehala ea Mehala

    • Seedling Tray

      Seedling Tray

    • Seedling Box

      Lebokose la Seedling

    • Plant Pot

      Pitsa ea Semela

    Lithuto Tsa Litaba

     
     
     
     

    Re fana ka mechini e tloaelehileng ea thermoforming ho pholletsa le liindasteri ho thusa bareki ho ntlafatsa ts'ebetso, ho fokotsa litšila le ho hola ka kholiseho.
    tlhahiso ka mechini e hahiloeng bakeng sa ho nepahala le ho ts'epahala.

    Shenghai Packaging|EPS Lunch Box Production Line Ntlafatso

    Thepa ea TTF-820AF e kopanya ho phunya, ho poma, le ho bokellana, ho fokotsa haholo litšenyehelo tsa basebetsi ho bareki, ho eketsa tlhahiso, le ho fokotsa ho itšetleha ka basebetsi. Sebaka sa ho futhumatsa se tsoang linaheng tse ling se fokotsa tšebeliso ea matla ka 8%, 'me litšenyehelo tsa nako e telele- li molemo; bophahamo ba 0.5mm-ho hula ka mokhoa o nepahetseng{8}}ho fokotsa sekhahla sa ho lahloa, 'me ka taolo e nepahetseng ea mocheso oa ±1 degree, ho lemoha ka nako ea 'nete ho theoha ha thepa le khatello ea moea, ho felisa kotsi ea mollo, le ho finyella tlhahiso e sireletsehileng le e sebetsang hantle.

    Shenghai Packaging | EPS Lunch Box Production Line Upgrade
    Boosting Production Efficiency: Up-Stacking Solution Raises PP Tray Line Speed from 25 to 28 Cycles/Minute

    Ho Matlafatsa Tlhahiso e Atlehang:-Tharollo ea Ho Lokisetsa E Emisa PP Tray Line Speed ​​ho tloha 25 ho isa ho 28 Cycles/Metsotso

    Client Mohammed o tlalehile hore mohala oa bona oa liphutheloana oa PP o ne o sebetsa ka lipotoloho tse 20-25 feela ka motsotso, ka tlase ho litlhoko tsa tlhahiso. Sehlopha sa rona se khothalelitse ho fetohela ho-mokhoa oa ho bokella. Kamora ho kengoa tšebetsong, mohala o ile oa tsitsa ka lipotoloho tse 28 ka motsotso, oa ntlafatsa haholo ts'ebetso le ho fihlela litlhoko tsa bokhoni ba moreki. Ntlafatso ena e ile ea rarolla bothata ba tlhahiso ea bona ka nepo.

    LBH
    • P: Mohala oa 4-station thermoforming o ntlafatsa boleng ba sehlahisoa joang ha o bapisoa le mochini oa 3-station?

      A: E arola ho etsa, ho pholisa, ho itšeha le ho bokellana liteisheneng tse inehetseng, e leng se netefatsang taolo e ntle ea mocheso le ho nepahala, ho fella ka ho tsitsa ha lihlahisoa tse phahameng.

    • P: Na mochini oa polasetiki oa 4-station thermoforming o loketse tlhahiso e nyane ea batch?

      K: Mofuta ona o loketse hantle-tlhahiso e kholo. Bakeng sa li-batches tse nyane, mochini o 3-station kapa oa matsoho o ka fana ka ts'ebeliso e ntle ea litšenyehelo.

    • P: Na mochini o ka etsoa hore o lumellane le libopeho le boholo ba sehlahisoa se itseng?

      A: Ho joalo. Mechini ea rona ea thermoforming e ka hlophisoa ka lisebelisoa tse ikhethileng le litlhophiso tse feto-fetohang ho amohela boholo ba sehlahisoa sa hau le litlhaloso tsa tlhahiso.

    • P: O ka fana ka mehlala?

      A: E, re fana ka mehlala ea melaoana ho latela boemo ba thekiso:

      • Lithekiso tsa{0}pele:Haeba o kopa disampole pele o etsa odara, litefiso tsa sampole li tlameha ho lefuoa esale pele. Litefiso tsena li tla ntšoa ho odara ea hau e latelang.

      • Nakong ea thekiso:Re fana ka lihlahisoa tsa sampole tsa mahala, empa bareki ba ikarabella bakeng sa litšenyehelo tsa thomello.

      • Kamora{0}lithekiso:Re fana ka mehlala ea mahala mme re koahela litšenyehelo tsa ho romella bakeng sa bareki ba rona ba teng.

    • P: Ke palo e tlase ea odara bakeng sa liodara tsa mochini o etsang thermoforming?

      A: MOQ ea rona ke mochini o le mong. Hape re ka sebetsana le liodara tse ngata tsa li-unit tse 10 kapa ho feta-ka kopo ikopanye le rona bakeng sa lintlha tse mabapi le litheko.

    • P: Nako ea hau ea ho tsamaisa ke efe?

      A: Joaloka feme ea mochini oa thermoforming ea othomathike naheng ea China, re fana ka lisebelisoa tse tloaelehileng nakong ea matsatsi a 45, 'me mechini e hlophisitsoeng e hloka bonyane matsatsi a 60.

    • P: Ke tlhokomelo efe e hlokahalang?

      K: Opereishene e boreleli e hloka ho hloekisoa khafetsa, ho tlotsoa ka mokhoa o nepahetseng, le ho hlahloba ka mehla likarolo tsa mochini le tsa motlakase.

    • P: Litšebeletso tsa hau ka mor'a-ke life?

      LITAI e fana ka litšehetso tsena:

      • Therisano ea tekheniki e fumaneha matsatsi a 7 ka beke, lihora tse 12 ka letsatsi

      • Litlhahlobo tsa remoutu tsa video bakeng sa ho rarolla mathata kapele

      • Latela-li-spare parts tsa morao-rao ka potlako (likarolo tse tloaelehileng li romelloa nakong ea lihora tse 24)

      • Ho-ketelo ea moenjiniere oa sebaka se teng (litšebeletso tse lefelloang)

    Joalo ka e mong oa baetsi le barekisi ba mochini oa thermoforming ba profeshenale ka ho fetesisa ba 4 naheng ea China, re hlahisoa ka lihlahisoa tsa boleng bo holimo le theko e ntle. Ka kopo, kholiseha ho reka{2}}mochini oa grade 4 oa thermoforming mochining oa rona.

    Ntlafatsa Tsebo ea Rōna ea Indasteri ho Matlafatsa Mohala oa Hao oa Tlhahiso
     
     
     
     

    Feme ea mochini e futhumatsang mocheso ea polasetiki ea LITAI e na le litsi tse tsoetseng pele tsa mochini oa CNC le lisebelisoa tsa tlhahlobo, tse sebetsang ka tumellano e tiileng le litsamaiso tsa tlhahiso tsa ISO9001 le CE{1}} tse netefalitsoeng. Mefuta ea rona ea -lisebelisoa tse sebetsang hantle tsa polasetiki tsa thermoforming, ho kenyeletsoa{4}}mechini ea liteishene tse ngata tsa thermoforming, metjhini ea polasetiki e etsang thermoforming cup, le lilaete tsa sheet extrusion li 'nile tsa tšeptjoa ke bareki linaheng le libakeng tse ka bang 100.

    • img1
    • img2
    • img3
    • img4
    • 24+ boiphihlelo ba lilemo
    • 60+ sehlopha sa tlhahiso ea boenjiniere
    • Matsatsi a 45 a ho etella pele bakeng sa lisebelisoa tse tloaelehileng
    • $20millione+ boleng ba tlhahiso ea selemo le selemo

    Fumana Qotsulo

    Ka kopo fana ka litlhoko tsa hau tse qaqileng tsa tlhahiso, joalo ka thepa, boholo ba sehlahisoa, litebello tsa boiketsetso, le sepheo sa tlhahiso, e le hore re ka lekola ho khonahala le ho sisinya mefuta e nepahetseng kapa tharollo e etselitsoeng litlhoko tsa hau.
    Kholiseha, re tla khutlela ho uena nakong ea lihora tse 24.
    sales4@litai.cc